Package Contains 2 Assembled coilovers and 2 Rear Shocks
Front pair of two Strut & Spring assemblies with matched rear pair of two shocks.🚚 Free Worldwide Shipping on All Orders!Shop Now
HomeStore
Bilstein 6112 Strut & Spring Assembled + Rear 5160 Reservoir Shocks Set for 2007-2009 Toyota FJ Cruiser Heavy Load 4WD
Bilstein 6112 Strut & Spring Assembled + Rear 5160 Reservoir Shocks Set for 2007-2009 Toyota FJ Cruiser Heavy Load 4WD
Part Numbers & Details
Bilstein 90-Day Warranty
Manufacturer Warranty protects against defects and premature failure.Choose Your Vehicle Spec & Lift Setting Above
To decide which Circlip location is right for your application, refer to table provided as an image. Make a selection from the drop-down menus above to choose your desired combination.Designed for 4WD vehicles
This product only works for 4WD vehicles.Important Fitment Note
For 150-200 lbs additional front weightInstall Ready
Strut & spring assembled, ready for installation. No Coil Spring Compressor required.Specifications
| Part Number Options | Position | Item | Quantity | Reservoir | Color | Finish | Boot Included | Internal Design |
|---|---|---|---|---|---|---|---|---|
| 47-311190 | Front | Strut & Spring | 1 | No | Silver | Dampers: Zinc Plated/Springs: Black | No | Monotube |
| 25-311211 | Rear Left | Shock Absorber | 1 | |||||
| 25-325096 | Rear Right | Shock Absorber | 1 |
Product Details
Shock Surplus has made your install easier with this fully assembled 6112 Coil & Spring kit. Bilstein's 6112 shock and spring package is designed for the adventure enthusiast wanting more out of their daily-driver or weekend ride. Extremely capable not only off-road, but also dramatically improves on-road handling characteristics and road feedback. The height adjustment of the 6112 kit allows the drive to remain at factory height, or to level out the front end of the vehicle for larger wheel and tire clearance. This Bilstein kit rivals 2.5" race-series shocks and coilovers from the competition, in an easily accessible performance package that can get you almost anywhere off-road. Bilstein 5160 Reservoir shock absorbers are a long lasting and high performance shock, suitable for even the most aggressive environments. Reservoirs ensure shock fade does not occur, while keeping hydraulic oil inside the shock at the coolest temperature possible. The perfect shock for owners that are off-road and off-trail more often than not. These shocks will also dominate the road, and provide excellent control. Shaft Diameter: 14mm, with 46mm smooth body monotube design.
Select Vehicle Spec
Select Circlip Location
From $525.00
Original: $1,499.99
-65%Bilstein 6112 Strut & Spring Assembled + Rear 5160 Reservoir Shocks Set for 2007-2009 Toyota FJ Cruiser Heavy Load 4WD—
$1,499.99
$525.00More Images
Bilstein 6112 Strut & Spring Assembled + Rear 5160 Reservoir Shocks Set for 2007-2009 Toyota FJ Cruiser Heavy Load 4WD
Part Numbers & Details
Package Contains 2 Assembled coilovers and 2 Rear Shocks
Front pair of two Strut & Spring assemblies with matched rear pair of two shocks.Bilstein 90-Day Warranty
Manufacturer Warranty protects against defects and premature failure.Choose Your Vehicle Spec & Lift Setting Above
To decide which Circlip location is right for your application, refer to table provided as an image. Make a selection from the drop-down menus above to choose your desired combination.Designed for 4WD vehicles
This product only works for 4WD vehicles.Important Fitment Note
For 150-200 lbs additional front weightInstall Ready
Strut & spring assembled, ready for installation. No Coil Spring Compressor required.Specifications
| Part Number Options | Position | Item | Quantity | Reservoir | Color | Finish | Boot Included | Internal Design |
|---|---|---|---|---|---|---|---|---|
| 47-311190 | Front | Strut & Spring | 1 | No | Silver | Dampers: Zinc Plated/Springs: Black | No | Monotube |
| 25-311211 | Rear Left | Shock Absorber | 1 | |||||
| 25-325096 | Rear Right | Shock Absorber | 1 |
Product Details
Shock Surplus has made your install easier with this fully assembled 6112 Coil & Spring kit. Bilstein's 6112 shock and spring package is designed for the adventure enthusiast wanting more out of their daily-driver or weekend ride. Extremely capable not only off-road, but also dramatically improves on-road handling characteristics and road feedback. The height adjustment of the 6112 kit allows the drive to remain at factory height, or to level out the front end of the vehicle for larger wheel and tire clearance. This Bilstein kit rivals 2.5" race-series shocks and coilovers from the competition, in an easily accessible performance package that can get you almost anywhere off-road. Bilstein 5160 Reservoir shock absorbers are a long lasting and high performance shock, suitable for even the most aggressive environments. Reservoirs ensure shock fade does not occur, while keeping hydraulic oil inside the shock at the coolest temperature possible. The perfect shock for owners that are off-road and off-trail more often than not. These shocks will also dominate the road, and provide excellent control. Shaft Diameter: 14mm, with 46mm smooth body monotube design.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Part Numbers & Details
Package Contains 2 Assembled coilovers and 2 Rear Shocks
Front pair of two Strut & Spring assemblies with matched rear pair of two shocks.Bilstein 90-Day Warranty
Manufacturer Warranty protects against defects and premature failure.Choose Your Vehicle Spec & Lift Setting Above
To decide which Circlip location is right for your application, refer to table provided as an image. Make a selection from the drop-down menus above to choose your desired combination.Designed for 4WD vehicles
This product only works for 4WD vehicles.Important Fitment Note
For 150-200 lbs additional front weightInstall Ready
Strut & spring assembled, ready for installation. No Coil Spring Compressor required.Specifications
| Part Number Options | Position | Item | Quantity | Reservoir | Color | Finish | Boot Included | Internal Design |
|---|---|---|---|---|---|---|---|---|
| 47-311190 | Front | Strut & Spring | 1 | No | Silver | Dampers: Zinc Plated/Springs: Black | No | Monotube |
| 25-311211 | Rear Left | Shock Absorber | 1 | |||||
| 25-325096 | Rear Right | Shock Absorber | 1 |
Product Details
Shock Surplus has made your install easier with this fully assembled 6112 Coil & Spring kit. Bilstein's 6112 shock and spring package is designed for the adventure enthusiast wanting more out of their daily-driver or weekend ride. Extremely capable not only off-road, but also dramatically improves on-road handling characteristics and road feedback. The height adjustment of the 6112 kit allows the drive to remain at factory height, or to level out the front end of the vehicle for larger wheel and tire clearance. This Bilstein kit rivals 2.5" race-series shocks and coilovers from the competition, in an easily accessible performance package that can get you almost anywhere off-road. Bilstein 5160 Reservoir shock absorbers are a long lasting and high performance shock, suitable for even the most aggressive environments. Reservoirs ensure shock fade does not occur, while keeping hydraulic oil inside the shock at the coolest temperature possible. The perfect shock for owners that are off-road and off-trail more often than not. These shocks will also dominate the road, and provide excellent control. Shaft Diameter: 14mm, with 46mm smooth body monotube design.
